Product Selector
TW116
This is series of lockwashers are coupled with NHE series heavy duty locknuts. Lockwashwers engage a keyway in a shaft or adapter sleeve slot, then locks the accompanying locknut in position by bending one of the washer tabs into the nut’s outside diameter slots.
Features and benefits
- Fast and simple to use mating component to a locknut.
- Size range that accommodates most rigorous applications.
- Simple installation and removal.
- Standard Locknut sets the industry locknut standard
- TW lockwashers have a 45 degree tang angle for easier locking.
- Can be mounted directly to the shaft or on an adapter sleeve.
- A new lockwasher should be used each time the corresponding NHE locknut and assembly is reinstalled.
- Unless otherwise specified, manufactured from AISI grade 1020 series steel.
- Most suitable for applications using cams, clutches, gears, pulleys, sprockets, and other general industry power transmission applications.
| Dimensions | |||
|---|---|---|---|
| R | 3.177 | INCH | Bore |
| E | 3.844 | INCH | Face Diameter |
| B | 4.391 | INCH | Dia. over Tangs |
| S | 0.353 | INCH | Key Width |
| X | 3.012 | INCH | Inside Dia. |
| NOTAN | 19 | INCH | No. of Tangs |
| T | 0.328 | INCH | Tang Width |
| Q | 0.085 | INCH | Material Thickness |
| Weight | LB/100 | ||