Product Selector
H212
This series of metric adapter assemblies accommodates standard small bore bearings. They are the most commonly used method for locating tapered bore ball or roller bearings onto a cylindrical shaft. This series of adapters are used with 12 and 13 series self-aligning ball bearings, and 213 and 222 series spherical roller bearings.
Features and benefits
- Heavy duty positive locking method for industrial applications.
- Easy to install at any position on a straight shaft without the need for additional locating device.
- Common technique and design allow simple installation and removal.
- Standard Locknut sets the industry locknut standard
Price: $64.85
- Can be mounted directly to a straight shaft or on against the step on a stepped shaft for accurate axial positioning.
- Adapter sleeves and KM locknuts can be reused, provided they are not damaged. A new lockwasher or locking plate should be used each time the corresponding locknut is installed.
- Conforms with ABMA, SAE and ABEC standards for bearing and power transmission applications. Unless otherwise specified, manufactured from AISI grade 1000 or 1200 series steel.
- Bearing bore surface finish will not exceed 100 microinches for sizes 00-10, 120 microinches for sizes 11-22, and 150 microinches for sizes above 22.
| Dimensions | |||
|---|---|---|---|
| d | 55 | INCH | Bore Diameter |
| A | 62.1 | INCH | Diameter to Sharp Corner |
| L | 38 | INCH | Sleeve Length |
| MT | M60X2 | Metric Threads | |
| G | 18 | INCH | Thread Length |
| F | 2.5 | INCH | Slot Width |
| P | 9 | INCH | Slot Width |
| T | 21 | INCH | Slot Depth |
| Included products | |
|---|---|
| Locknut | KM12 |
| Lockwasher / Lockplate | MB12 |