Product Selector
H3176
H3176X360MM Standard Locknut Part Number
This is a series of adapter assemblies used for wider series bearings. They are the most commonly used method for locating tapered bore roller bearings onto a cylindrical shaft. This series of adapters is used with 231 series spherical roller bearings.
Features and benefits
- Heavy duty positive locking method for industrial applications.
- Easy to install at any position on a straight shaft without the need for additional locating device.
- Common technique and design allow simple installation and removal.
- Standard Locknut sets the industry locknut standard
- H3122 through H3144 series use a thin series (KML) locknut and (MBL) lockwasher configuration.H3148 and larger use thin section (N-000) locknuts and (MS) locking clips to accommodate larger shaft assemblies.
- Can be mounted directly to a straight shaft or on against the step on a stepped shaft for accurate axial positioning.
- Adapter sleeves and KM locknuts can be reused, provided they are not damaged. A new lockwasher or locking clip should be used each time the corresponding locknut is installed.
- Conforms with ABMA, SAE and ABEC standards for bearing and power transmission applications. Unless otherwise specified, manufactured from AISI grade 1000 or 1200 series steel.
- Bearing bore surface finish will not exceed 100 microinches for sizes 00-10, 120 microinches for sizes 11-22, and 150 microinches for sizes above 22.
| Dimensions | |||
|---|---|---|---|
| d | 360 | INCH | Bore Diameter |
| A | 397 | INCH | Diameter to Sharp Corner |
| L | 264 | INCH | Sleeve Length |
| MT | TR380X5 | Metric Threads | |
| G | 72 | INCH | Thread Length |
| F | 10 | INCH | Slot Width |
| P | 32 | INCH | Slot Width |
| T | 26 | INCH | Slot Depth |
| Included products | |
|---|---|
| Locknut | HM3176 |
| Lockwasher / Lockplate | MS3176 |