Product Selector
H3264
This is a series of metric adapter assemblies used for larger spherical bearings. They are the most commonly used method for locating tapered bore roller bearings onto a cylindrical shaft. This series of adapters is used with 232 series spherical roller bearings; they are an extension of our SNW100 adapter assemblies for bore sizes above 56.
Features and benefits
- Heavy duty positive locking method for the heaviest industrial applications.
- Easy to install at any position on a straight shaft without the need for additional locating device.
- Common technique and design allow simple installation and removal.
- Standard Locknut sets the industry locknut standard
- H3260 through H32/500 adapters use thin section (HM) locknuts and (MS-3100) locking slips.
- Can be mounted directly to a straight shaft or on against the step on a stepped shaft for accurate axial positioning.
- Adapter sleeves and HM locknuts can be reused, provided they are not damaged. A new locking slip should be used each time the corresponding locknut is installed.
- Conforms with ABMA, SAE and ABEC standards for bearing and power transmission applications. Unless otherwise specified, manufactured from AISI grade 1000 or 1200 series steel.
- Bearing bore surface finish will not exceed 100 microinches for sizes 00-10, 120 microinches for sizes 11-22, and 150 microinches for sizes above 22.
| Dimensions | |||
|---|---|---|---|
| d | 300 | INCH | Bore Diameter |
| A | 338 | INCH | Diameter to Sharp Corner |
| L | 258 | INCH | Sleeve Length |
| MT | TR320X5 | Metric Threads | |
| G | 53 | INCH | Thread Length |
| F | 8 | INCH | Slot Width |
| P | 24 | INCH | Slot Width |
| T | 25 | INCH | Slot Depth |
| Included products | |
|---|---|
| Locknut | HM3164 |
| Lockwasher / Lockplate | MS3164 |